Corken Pumps Full Range



Corken pumps has specialized in the transfer of hazardous, non-lubricating liquefied gases and low viscosity liquids, in the manufacture of LPG pumps and compressors for a wide range of industrial markets.






http://fuelsystemsuae.com/corken-pumps-full-range/

Location: Dubai - United Arab Emirates

Comments

Post a Comment

Popular posts from this blog

Secondary Containment Leak Detection | Ls600-Ld Float Actuated Leak Sensor

Image
Product Description The   LS600-LD   float-actuated leak sensor provides secondary containment leak detection for above ground and underground storage tank applications. The sensor assembly may be suspended at the desired point of actuation via the sensor cable and compression fitting, or allowed to rest at the bottom of the containment area being monitored. The compact size and favorable displacement properties of the LS600-LD make it ideal for monitoring shallow liquid levels. The LS600-LD Leak Switch is available with a Buna N or stainless steel float for monitoring in most petrochemical and chemical storage tank applications. The LS600-LD optionally supports Pneumercator’s FAULT-DETECT supervised wiring technology, which automatically detects field wiring faults when connected with a TMS series controller Applications • Containment, Manway and Piping Sumps • Turbine Enclosure • Dispenser Pan • Double-Wall Steel Tank Specifications •  Technology: ...
Read more

700 Series Rotary Flow Meter

Image
The Total Control Systems 700 series rotary flow meter was designed to measure liquids within the Adhesives, Agricultural, Aviation, Chemical, Food Processing, Paint, Petrochemical, Petroleum, Pharmaceutical, Printing, Textiles  and other industries, requiring precise liquid measurement solutions. DESIGN The TCS Model 700 series flow meter has a simple and efficient meter design consisting of a housing and three rotors that rotate in unison within the measuring chamber. The absence of wear, from no metal-to-metal contact inside the chamber, eliminates any deterioration in accuracy and provides a long service life. The rotors are supported by bearings inserted into two bearing plates, where at the end of each rotor shaft is a timing gear. The timed rotation between each rotor is then transferred through the calibration adjuster to the register, which will then give a consistent and superior measurement of accuracy. http://fuelsystemsuae.com/700-series-rotary-flow-meter/ ...
Read more

Nivopress Npk Hydro Static Level Transmitter|Hydraulics Pressure & Level Sensor

Image
NIVOPRESS The two-wire level transmitter consists of a special, breathing cable containing a capillary pipe and a stress-resistant inlet and of a probe. The probe is a stainless steel cartridge with a membrane at the bottom that is protected by a plastic covering cap with holes. The level metering is based on the measuring of the pressure difference between the hydro static pressure of the liquid head above the probe and the actual atmospheric pressure. This pressure difference is converted into a 4 to 20 mA output signal by the ceramic transducer (attached to the stainless steel membrane) and the electronics. APPLICATION The  NIVOPRESS NPK  submersible hydrostatic level transmitter is applicable to clean or chemically faintly contaminated liquids in boreholes, open reservoirs and tanks. It is easy to install in already existing tanks and in deep boreholes and is especially recommended for monitoring and controlling of submersible pumps. The low cost NPK-2 version ...
Read more