Horizontal Coalescer Separator Series | Coalescer Separator Housings In Dubai


Category C Coalescer Separator housings are for commercial aviation fuel. Type S qualifications can be used at all filtration points in an aviation fueling
system. Type S is meant to be used at filtration points where significant levels of water and dirt in the product can be expected. Facet HCS Series Horizontal
Coalescer Separator housings fully comply with EI 1581, Category C, Type S requirements.

RELIABLE PERFORMANCE

Facet coalescer separators are a result of over 50 years of continuous research and development to meet the ever demanding performance requirements in the aviation fuel handling industry.
This, along with proven field performance, demonstrates Facet’s ability to provide quality products that meet current specifications as well as specific customer requirements for installations in
refineries, bulk storage, terminals, heliports, airports, etc.

STANDARD HOUSING DESIGN

• EI 1596 Design & Construction
• Welded carbon steel construction—other materials available on request
• ASME Code, Section VIII construction, stamped and certified
• Design pressure: 150 psi @ 250˚F—other design pressures available on request
• Inlet, outlet and drain connections permanently marked
• Interior: Epoxy coated (MIL-PRF-4556)
• Exterior: Prime coated
• Swing bolt head closures
• Hinged end opening cover
• Flanged inlet and outlet connections
• Buna-N o-ring closure seal
• Choice of rod or screw base coalescer cartridge mounting styles
• 4″ inlet/outlet cleanout/inspection connections (when permitted by design)
• Knife edge cartridge mounting seals
• Spider plate attached to vessel wall

OPTIONS

• Automatic air eliminator with check valve*
• Pressure relief valve*
• Differential pressure gauge*
• Pilot control valve
• Pilot tester
• Water slug control valve
• Electrical water-level alarm
• Water drain valves
http://fuelsystemsuae.com/horizontal-coalescer-separator-series/
Location: Dubai - United Arab Emirates

Comments

Post a Comment

Popular posts from this blog

Anti Flood Detector Owwg 3 | Oil & Water Alarm Unit System in Dubai

Image
Applications For visual and audible alarms if liquids with a flash point of ≥ 55 °C are detected in, for example, oil storage rooms, drip pans, inspection ducts, ducts, protective pipes, manholes, pipes and cellars.  Suitable for the following media: water, fuel oil EL, L or M, diesel fuel or low-viscosity lubricating oils, motor oils, hydraulic oils, vegetable oils and transformer oils, antifreeze agents, oil-water mixtures and  emulsions. Use as leak detection system class III as per EN 13160-1/-4 and as leak detection system as per TRWS 791-1. Description The oil/water alarm unit in a wall mounting housing triggers visual and audible alarms in the event of accumulations of liquids which can be caused by tank leaks, back flow, flooding, etc. ÖWWG 3 consists of a control unit with visual/audible alarm, Test and Acknowledge buttons as well as a flexible PTC thermistor probe. The probe is mounted at the lowest point of the area to be monitored.  The...
Read more

Secondary Containment Leak Detection | Ls600-Ld Float Actuated Leak Sensor

Image
Product Description The   LS600-LD   float-actuated leak sensor provides secondary containment leak detection for above ground and underground storage tank applications. The sensor assembly may be suspended at the desired point of actuation via the sensor cable and compression fitting, or allowed to rest at the bottom of the containment area being monitored. The compact size and favorable displacement properties of the LS600-LD make it ideal for monitoring shallow liquid levels. The LS600-LD Leak Switch is available with a Buna N or stainless steel float for monitoring in most petrochemical and chemical storage tank applications. The LS600-LD optionally supports Pneumercator’s FAULT-DETECT supervised wiring technology, which automatically detects field wiring faults when connected with a TMS series controller Applications • Containment, Manway and Piping Sumps • Turbine Enclosure • Dispenser Pan • Double-Wall Steel Tank Specifications •  Technology: ...
Read more

Supplier Of Fuel Handling Systems And Equipment

Image
The oil and gas sector has gained tremendously from the technological advancements in the field of engineering. With safety and precision being the key in the oil and gas vertical, the development of the state-of-the-art fuel handling systems and equipment has empowered this sector to a large extent. Benefits are not just limited to the oil and gas industry, but it has also helped other verticals that are reliant on uninterrupted fuel supply. High-quality fuel handling systems and equipment provide adequate safety to the handlers and eliminates the chances of human performance errors. But, to get the most hi-tech fuel handling systems and equipment, you need to find a reliable supplier of fuel handling systems and equipment. And, if you operate out of the UAE or middle east, finding a trusted supplier of fuel handling systems and equipment is not an easy task. Fuel handling system A complex system, fuel handling system is designed to provide an uninterrupted supply of fuel ...
Read more