FMTS

Product Description The   LS600-LD   float-actuated leak sensor provides secondary containment leak detection for above ground and underground storage tank applications. The sensor assembly may be suspended at the desired point of actuation via the sensor cable and compression fitting, or allowed to rest at the bottom of the containment area being monitored. The compact size and favorable displacement properties of the LS600-LD make it ideal for monitoring shallow liquid levels. The LS600-LD Leak Switch is available with a Buna N or stainless steel float for monitoring in most petrochemical and chemical storage tank applications. The LS600-LD optionally supports Pneumercator’s FAULT-DETECT supervised wiring technology, which automatically detects field wiring faults when connected with a TMS series controller Applications • Containment, Manway and Piping Sumps • Turbine Enclosure • Dispenser Pan • Double-Wall Steel Tank Specifications •  Technology: ...

Applications For visual and audible alarms if liquids with a flash point of ≥ 55 °C are detected in, for example, oil storage rooms, drip pans, inspection ducts, ducts, protective pipes, manholes, pipes and cellars.  Suitable for the following media: water, fuel oil EL, L or M, diesel fuel or low-viscosity lubricating oils, motor oils, hydraulic oils, vegetable oils and transformer oils, antifreeze agents, oil-water mixtures and  emulsions. Use as leak detection system class III as per EN 13160-1/-4 and as leak detection system as per TRWS 791-1. Description The oil/water alarm unit in a wall mounting housing triggers visual and audible alarms in the event of accumulations of liquids which can be caused by tank leaks, back flow, flooding, etc. ÖWWG 3 consists of a control unit with visual/audible alarm, Test and Acknowledge buttons as well as a flexible PTC thermistor probe. The probe is mounted at the lowest point of the area to be monitored.  The...

Strainers provide economical protection for costly pumps, meters, valves, and other similar mechanical equipment by straining foreign matter from the connected piping system. Installation of a strainer before mechanical equipment can ensure trouble free service and avoid costly shutdowns for repair or replacement of equipment damaged by foreign matter. The size of the perforation or mesh in the basket screen will determine the smallest particles captured. See Strainer Information section of the Mueller Steam Specialty Engineering binder for detailed information including sizes and materials available. Typical Service • Duplex Strainers are designed for use in fluid handling systems where the flow cannot be shut down for basket cleaning. • Typical services include cooling water, compressors, condensers, fire lines, fuel lines,lubrication systems, salt and fresh water systems, chemical process systems, pump suction service, and more. • Consider strainer body and screen mater...

Cast carbon screwed strainer used to strain foreign matter from pipelines and provide economical protection, they are well suited for long service in high pressure and temperature applications. Typical Service • Used extensively to strain foreign matter from pipelines and provide economical protection for costly pumps, meters, valves, and other similar mechanical equipment. • These are especially critical where weld debris is often present in the pipeline. • Well suited for long service in high pressure and temperature applications. Features • Machined seats in both body and cap align and lock the screen in place to stop sediment bypass. • Machined seats facilitate alignment and accurate reseating after servicing. Construction • Straight threaded, gasketed cap is used for easy disassembly and assembly. Many others use Loctite, rendering disassembly virtually impossible. • Heavy duty, rugged bodies with extra heavy bore. http://fuelsystemsuae.com/cast-carbon-scre...

Strainers provide economical protection for costly pumps, meters, valves, and other similar mechanical equipment by straining foreign matter from the connected piping system . Installation of a strainer before mechanical equipment can ensure trouble free service and avoid costly shutdowns for repair or replacement of equipment damaged by foreign matter. The size of the perforation or mesh in the basket screen will determine the smallest particles captured. See Strainer Information section in the Mueller Steam Specialty Engineering binder  for detailed information including sizes and materials available. Features • Designed for large capacity straining and ease of maintenance. • Cover is secured with quick-opening knobs to minimize service time. • O-ring seals on both the cover and baskets can usually be reused after service, no need to clean gasket residue and replace costly gaskets. • Machined basket seat eliminates particle bypass. http://fuelsystemsuae.com/ba...

 Back Pressure Regulator 7700 Series is used to control back pressure on a system to avoid over           pressing in liquid and gas service or piping. Fuel Management & Transfer Systems (FMTS) is an official distributor of SMART FILL Fuel Management System from Australia, which provides complete solution for your Fuel. FMTS provides turn key solutions for your Fuel application. We track the fuel sourced from third party suppliers, provide 24/7 tracking of the fuel stored in fuel tanks, and finally track the fuel being delivered to your fleet, vehicle wise and driver wise with RFID FOBs and keys with precise date, time and location.

1. Scope: This instruction is applied to nominal diameter 1” – 2” CLASS 800 threaded and socket weld end, gate valves. 2. Safety Instructions: 2.1 Read this Installation, Operation and Maintenance Manual before using the valve. Sharpe Valves cannot anticipate all the situations a user may encounter while installing and using the Sharpe Valve. The user must know and follow all applicable industry specifications on the safe installation and use of these valves. Only qualified personnel or technicians who are trained for maintenance work and have read the instructions are to assemble and disassemble the valve. Misapplication of the product may result in injuries or property damage. 3. Applications: 3.1 Valves are to be installed in a pipeline to prevent fluid flow from either direction. It can be installed in vertical or horizontal position. 3.2 Stainless steel valves are suited to corrosive service. Please consult Sharpe Valve for special applications. 3.3. Mater...

Why use hose reels? Why use  hose reels ?  Because they make hose handling more efficient and safer. Your hoses, cables and cords will last up to five times longer. You will improve hose management, which decreases labor costs. Your chances of injuries from tripping hazards will decrease, which saves lost work time, medical bills and higher insurance. You also save the cost of replacing expensive hoses, cables and cords that get run over by fork lifts and other vehicles, which saves equipment costs. Here are the most compelling reasons to use hose, cord and cable reels. Increase Productivity Locating hoses and cords where and when you need them increases productivity. All of these factors contribute to an improved work environment, which saves time, equipment and money. Stop Leakages Hoses on reels can reduce the threat of expensive air and water leakages. OSHA says reduce your slips, trips and falls Slips, trips and falls constitute the majority of gener...

The objective of fuel system providers in Dubai, UAE, and elsewhere is to provide efficient measurement and management of fuel. Fuel management systems (FMS) are critical in industries like mining, construction and waste management. They track how much fuel has been taken and by whom. Products from different fuel system providers in the Dubai , UAE, market have varying capabilities. As all data is recorded, FMS provide significant cost savings. The advent of cloud technology has added on to the business benefits of automatic FMS. Fuel systems providers such as Smart fill provide the ability to capture all fuel use data automatically and store it online on a remote server. This ensures data availability at all times, eliminating the need to travel out to the unit to access it. This is a big benefit in remote areas of Dubai, UAE, where such systems are used. Intelligent FMSs like Smartfill help manage your fuel usage, control vehicle access, designate authorised users and prov...

Reliability Durable pumps for fast and quiet operation. Sliding-vane design provides sustained performance and trouble free operation. Unique Features Adjustable relief valve protects pump from excessive pressure. Optional air operated diaphragm relief valve offers easy hose and nozzle handling. T-Type strainers are available to protect pumping systems from damage caused by welding slag and foreign matter in the piping and tanks. Sizing Options Available in 1.5, 2, 2.5, 3, and 4 inch port sizes with flow rates from 10 to 500 U.S. gallons (2 to 113 m³/H) and pressures up to 125 PSI (8.6 bar). Applications Fuel oil delivery truck, fleet refueling, lube oil, aviation refuelers, transports of petro chemical, gasoline, solvents, and many more.

Corken pumps has specialized in the transfer of hazardous, non-lubricating liquefied gases and low viscosity liquids, in the manufacture of LPG pumps and compressors for a wide range of industrial markets. http://fuelsystemsuae.com/corken-pumps-full-range/

Fuel Management & Transfer Systems (FMTS) is an official distributor of SMART FILL Fuel Management System from Australia . We provide complete solution for your Fuel Management. FMTS provides turn key solutions for your Fuel application. We track the fuel sourced from third party suppliers, Provide 24/7 tracking features of your fuel stored in fuel tanks and finally track the fuel being delivered to your fleet, which is vehicle & driver specific. The system integrates RFID FOBs & keys with precise date, time and location details, recorded for reference. http://fuelsystemsuae.com/