OPW Aviation Drifting Suction Assemblies In Dubai




Floating, single or scissor aspirations, form 2″ to 24″ aluminum or stainless steel, aluminum swivel joint stainless steel or carbon steel with nickel finish chemical.

 Floating suctions are used in vertical or horizontal, below or above ground storage tanks where little or no contamination can be stick out, such as aircraft jet fuel.

 http://fuelsystemsuae.com/floating-suctions/
Location: Dubai - United Arab Emirates

Comments

Post a Comment

Popular posts from this blog

Secondary Containment Leak Detection | Ls600-Ld Float Actuated Leak Sensor

Image
Product Description The   LS600-LD   float-actuated leak sensor provides secondary containment leak detection for above ground and underground storage tank applications. The sensor assembly may be suspended at the desired point of actuation via the sensor cable and compression fitting, or allowed to rest at the bottom of the containment area being monitored. The compact size and favorable displacement properties of the LS600-LD make it ideal for monitoring shallow liquid levels. The LS600-LD Leak Switch is available with a Buna N or stainless steel float for monitoring in most petrochemical and chemical storage tank applications. The LS600-LD optionally supports Pneumercator’s FAULT-DETECT supervised wiring technology, which automatically detects field wiring faults when connected with a TMS series controller Applications • Containment, Manway and Piping Sumps • Turbine Enclosure • Dispenser Pan • Double-Wall Steel Tank Specifications •  Technology: ...
Read more

Filter Vessel Accessories for Industrial & Chemical Applications in Dubai

Image
Applications FAUDI Aviation Filter Monitors are simple compact units can easily be installed and serviced. they are developed in particular for mobile fueling installation and can be delivered in tow versions. Type FFM without and type FFMI with interlock system. The FAUDI Aviation interlock system is an additional safety device designed to Prevent closure of the cover should the full amount of monitor elements not be fitted. The interlock prevents unfiltered fuel being delivered if an element is missing. http://fuelsystemsuae.com/filter-vessels-accessories/
Read more

Nivopress Npk Hydro Static Level Transmitter|Hydraulics Pressure & Level Sensor

Image
NIVOPRESS The two-wire level transmitter consists of a special, breathing cable containing a capillary pipe and a stress-resistant inlet and of a probe. The probe is a stainless steel cartridge with a membrane at the bottom that is protected by a plastic covering cap with holes. The level metering is based on the measuring of the pressure difference between the hydro static pressure of the liquid head above the probe and the actual atmospheric pressure. This pressure difference is converted into a 4 to 20 mA output signal by the ceramic transducer (attached to the stainless steel membrane) and the electronics. APPLICATION The  NIVOPRESS NPK  submersible hydrostatic level transmitter is applicable to clean or chemically faintly contaminated liquids in boreholes, open reservoirs and tanks. It is easy to install in already existing tanks and in deep boreholes and is especially recommended for monitoring and controlling of submersible pumps. The low cost NPK-2 version ...
Read more